PT FTS Indonesia
RCI Purifier: FP 1000L - (SM) strap-mounted Nominal Flow: 20-24 gal/min Max Pump Pressure: Self-Priming - 78 psi Power Requirements: 115/230 V (UL-listed) 60 Hz explosion-proof single-phase
RCI PFPU-1
The PFPU-1 Portable Fuel Polishing Unit is a portable contaminant removal system for use in both above- and below-ground storage tanks. It is designed specifically to remove water and other contaminants common to stored diesel fuel.
The standard system operates on 115V power and is lightweight enough for one-person handling and operation. (12V and 230V systems are available: See PFPU-2 and PFPU-3)
It is designed to fit through doorways and up stairways. It can be used in almost any location from rooftops to shipboard.The PFPU-1 utilizes RCI’s patented fuel purification technology, which uses no filters or moving parts. It is used as primary fuel purification and removes up to 99.8% of free water and up to 95% of other heavy contaminants, excluding sludge (optional bag filter required for sludge), down to approximately 10 microns. The filters found on diesel engines provide the secondary and final fuel filtration from 2 to 5 microns.
The PFPU-1 is factory pre-assembled and consists of an FP 1000 fuel purifier, a self-priming fuel pump, UL-approved motor, portable hand-cart, suction and return hoses. Height: 50 inch Width: 22 inch Depth: 31 inch Weight: 145 lbs RCI Purifier: FP 1000L – (SM) strap-mounted Nominal Flow: 20-24 gal/min Drain Port: 1/2 inch Max Pump Pressure: Self-Priming – 78 psi Motor: UL- Approved, for Class C fuels Power Requirements: 115/230 V (UL-listed) 60 Hz explosion-proof single-phase Power: 1/3 hp Fuel Type: For light-viscosity fuels, such as diesel, B20, gasoline, avgas and jet fuel Suction Hose: 3/4″ x 20′ detachable suction hose, explosion-proof Return: 3/4″ x 12′ detachable pressure hose Shut-off Nozzle: 3/4″ manual Swivel Couplings: 90-degree Power Cord: 25 foot Warranty: 1 year mfr. warranty on pump
Order Enquiry Form
Contact form description text